Ŀ
                  Fast HyperQWK v2.x configuration file                   
Ĵ
                Alter only the fields behind the keywords!                


Remove: Remove this entire line, or HQWK will not work!

Ŀ
          Enter the HQWK BBS-registration name, or UNREGISTERED           


BBSname: UNREGISTERED

Ŀ
        Enter the (up to 8 characters) QWK-ID to use for this BBS         


QWK-ID: MYBBS

Ŀ
     Enter the path to the MBBS config files, remember the trailing \     
      Make sure your MBBS config files are all in the same directory      


CfgPath: c:\bbs\

Ŀ
   Enter the path to use for external objects, remember the trailing \    
  If you run your BBS on a network, this directory MUST be a directory    
  on the server (preferably on the same drive as the MBBS message files)  
  Please use less than three directory leveles for this path (c:\1\2\).   


ObjectPath: c:\hqwk\objects\

Ŀ
          Enter the path to use as a working directory for HQWK.          
   If you run your BBS in a network, this directory should be on a local  
      disk for each node, it should NOT be a directory on the server.     
                         Remember the trailing \                          
   Please use less than three directory leveles for this path (c:\1\2\)   


WorkPath: c:\hqwk\hold\

Ŀ
         Enter the number of the general Post conference in MBBS          
   This conference will be used for sending feedback from HQWK to users   


PostConf: 1

Ŀ
  Enter '1' for user functions to allow, or '0' to disallow a function.   
  Note: By disallowing a function you remove functionality from HQWK.     
  Please read and understand USER.DOC before disallowing any functions.   
  Also, if you should disallow any of these functions, be sure to tell    
  all BBS users about it. We strongly recommend all commands allowed.     
Ĵ
  1.ADD          2.DROP         3.SET         4.MSG          5.SEARCH     
  6.PACKING      7.SENDING      8.USERINFO    9.DELETE      10.FILEINFO   
 11.SEEK        12.DL          13.LISTDATE   14.STATS       15.BULLETINS  
 16.FILE LIST   17.REFRESH     18.LIMIT MSG  19.LIMIT MSGS  20.LIMIT OBJ  
 21.LIMIT OBJS  22.LIMIT AUTO  23.INSTBULL   24.CICON       25.INVITE     
 26.REMOVE      27.ZAP         28.KILL       29.NODL        30.GIVEDL     
 31.RESUME      32.AWAY        33.UL         34.GETFTYPE    35.NOTFTYPE   
 36.LIMIT LIST  37.FULLCONF    38.VIEW       39.FICON       40.NOTAWAY    
 41.HELP                                                                  


Allow: 11111111111111111111111111111111111111111

Ŀ
 Do not modify this undocumented switchboard unless HyperSoft advices it! 


Extra: 11111111111111111111

Ŀ
   Note that most the limiting values below refer to uncompressed data.   
  All this data will be compressed to about 1/3 of its size before being  
              sent to the users as a ZIP, ARJ or LZH-file.                
   There should really be no need to change any of the default values.    


Ŀ
     If you have less than 8-10MB disk space on the disk you use for      
  the HQWK 'WorkDir', you should enable the following option by entering  
   'YES' behind the 'SpaceMon'-field. If you do not have less than 10MB   
         available disk space there, enter 'NO' behind this field.        
Ĵ
   This option turns on 'intelligent' disk space checking, and will stop  
   message and bulletin grabbing, file listing and downloads when the     
                       'WorkDir' disk is 50% full.                        
 If you enable this option by writing 'YES' you should not need to change 
   the limiting values below - HQWK will do all the nessecary checking.   
Ĵ
 Do not enable this feature if you do not have to, it will slow down HQWK 


SpaceMon: NO

Ŀ
           Enter the maximum size in bytes for any file list              
           This will keep HQWK from listing way to many files             


ListLimit: 512000

Ŀ
      Enter the maximum size in bytes of any users message grabfile       


GrabLimit: 2048000

Ŀ
                 Enter the maximum message size in bytes                  


MessageLimit: 512000

Ŀ
            Enter the maximum total size of objects in bytes              


ObjectLimit: 2048000

Ŀ
      Enter the maximum number of bytes in files users can download       
                    from within HQWK each session                         


FileLimit: 4096000

Ŀ
  When you have filled out all the fields to work with your BBS, and you  
  have tested that HQWK works fine, you should remove all the text boxes  
  like this one in order to let HQWK read the configuration file faster!  

